Welcome!

@DevOpsSummit Authors: Elizabeth White, Yeshim Deniz, Liz McMillan, Pat Romanski, Aruna Ravichandran

Related Topics: @CloudExpo, Microservices Expo, Microsoft Cloud, Containers Expo Blog, Silverlight, Release Management

@CloudExpo: Blog Post

Step-by-Step: Build a SharePoint 2013 Lab in the Cloud on Windows Azure

Leverage Windows Azure as your Lab in the Cloud!

My good friend and colleague, Tommy Patterson, recently blogged about leveraging the Windows Azure Infrastructure as a Service (IaaS) preview offering to build a FREE lab environment in the Cloud.  You can read Tommy’s step-by-step article at:

What about a SharePoint 2013 Lab in the Cloud?
Now that SharePoint Server 2013 has been released, I frequently get asked about ways in which a SharePoint 2013 lab environment can be easily built for studying, testing and/or performing a proof-of-concept.  You could certainly build this lab environment on your own hardware, but due to the level of SharePoint 2013 hardware requirements, a lot of us may not have sufficient spare hardware to implement an on-premise lab environment.

This makes a great scenario for leveraging our Windows Azure FREE 90-day Trial Offer to build a free lab environment for SharePoint 2013 in the cloud.  Using the process outlined in this article, you’ll be able to build a basic functional farm environment for SharePoint 2013 that will be accessible for approximately 105 hours of compute usage each month at no cost to you under the 90-day Trial Offer.

After the 90-day trial period is up, you can choose if you’d like to convert to a full paid subscription.  If you choose to convert to a paid subscription, this lab environment will cost approximately $0.56 USD per hour of compute usage ( that’s right – just 56 cents per hour ) plus associated storage and networking costs ( which can typically be less than $10 USD per month for a lab of this nature ). These estimated costs are based on published Pay-As-You-Go pricing for Windows Azure that is current as of this article’s date.

Note: If you are testing advanced SharePoint 2013 scenarios and need more resources than available in the lab configuration below, you can certainly scale-up or scale-out elastically by provisioning larger VMs or additional SharePoint web and application server VMs.  To determine the specific costs associated with higher resource levels, please visit the Windows Azure Pricing Calculator for Virtual Machines.

SharePoint 2013 Lab Scenario
To deliver a functional and expandable lab environment, I’ll be walking through the approach of provisioning SharePoint Server 2013 on Windows Azure VMs as depicted in the following configuration diagram that will require three (3) VMs on a common Windows Azure Virtual Network.

SP2013onAzureScenario

Lab Scenario: SharePoint 2013 on Windows Azure VM

In this lab, we’ll be using a naming convention of XXXlabYYY01, where XXX will be replaced with your unique initials and YYY will be replaced with an abbreviation representing the function of a virtual machine or Windows Azure configuration component (ie., ad, db or app).

Note: This study lab configuration is suitable for study, functional testing and basic proof-of-concept usage.  This configuration is not currently supported for pilot or production SharePoint 2013 farm environments.

Prerequisites

The following is required to complete this step-by-step guide:

  • A Windows Azure subscription with the Virtual Machines Preview enabled.

    DO IT: Sign up for a FREE Trial of Windows Azure

    NOTE: When activating your FREE Trial for Windows Azure, you will be prompted for credit card information.  This information is used only to validate your identity and your credit card will not be charged, unless you explicitly convert your FREE Trial account to a paid subscription at a later point in time. 
  • Completion of the Getting Started tasks in the following article:

    DO IT: Getting Started with Servers in the Cloud
  • This step-by-step guide assumes that the reader is already familiar with configuring Windows Server Active Directory, SQL Server and SharePoint Server 2013 in an on-premise installation. This guide focuses on the unique aspects associated with configuring these components on the Windows Azure cloud platform.

Let’s Get Started!
In this step-by-step guide, you will learn how to:

  • Register a DNS Server in Windows Azure
  • Define a Virtual Network in Windows Azure
  • Configure Windows Server Active Directory in a Windows Azure VM
  • Configure SQL Server 2012 in a Windows Azure VM
  • Configure SharePoint Server 2013 in a Windows Azure VM
  • Export / Import Lab Environment via PowerShell

Exercise 1: Register a DNS Server in Windows Azure

Register the internal IP address that our domain controller VM will be using for Active Directory-integrated Dynamic DNS services by performing the following steps:

  1. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  2. Select Networks located on the side navigation panel on the Windows Azure Management Portal page.
  3. Click the +NEW button located on the bottom navigation bar and select Networks | Virtual Network | Register DNS Server.
  4. Complete the DNS Server fields as follows:

    - NAME: XXXlabdns01
    - DNS Server IP Address: 10.0.0.4
  5. Click the REGISTER DNS SERVER button.

Exercise 2: Define a Virtual Network in Windows Azure

Define a common virtual network in Windows Azure for running Active Directory, Database and SharePoint virtual machines by performing the following steps:

  1. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  2. Select Networks located on the side navigation panel on the Windows Azure Management Portal page.
  3. Click the +NEW button located on the bottom navigation bar and select Networks | Virtual Network | Quick Create.
  4. Complete the Virtual Network fields as follows:

    - NAME: XXXlabnet01
    - Address Space: 10.---.---.---
    - Maximum VM Count: 4096 [CIDR: /20]
    - Affinity Group: Select the Affinity Group defined in the Getting Started steps from the Prerequisites section above.
    - Connect to Existing DNS: Select XXXlabdns01 – the DNS Server registered in Exercise 1 above.
  5. Click the CREATE A VIRTUAL NETWORK button.

Exercise 3: Configure Windows Server Active Directory in a Windows Azure VM

Provision a new Windows Azure VM to run a Windows Server Active Directory domain controller in a new Active Directory forest by performing the following steps:

  1. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  2. Select Virtual Machines located on the side navigation panel on the Windows Azure Management Portal page.
  3. Click the +NEW button located on the bottom navigation bar and select Compute | Virtual Machines | From Gallery.
  4. In the Virtual Machine Operating System Selection list, select Windows Server 2012, December 2012 and click the Next button.
  5. On the Virtual Machine Configuration page, complete the fields as follows:

    - Virtual Machine Name: XXXlabad01
    - New Password and Confirm Password fields: Choose and confirm a new local Administrator password.
    - Size: Small (1 core, 1.75GB Memory)

    Click the Next button to continue.

    Note: It is suggested to use secure passwords for Administrator users and service accounts, as Windows Azure virtual machines could be accessible from the Internet knowing just their DNS.  You can also read this document on the Microsoft Security website that will help you select a secure password: http://www.microsoft.com/security/online-privacy/passwords-create.aspx.
  6. On the Virtual Machine Mode page, complete the fields as follows:

    - Standalone Virtual Machine: Selected
    - DNS Name: XXXlabad01.cloudapp.net
    - Storage Account: Select the Storage Account defined in the Getting Started steps from the Prerequisites section above.
    - Region/Affinity Group/Virtual Network: Select XXXlabnet01 – the Virtual Network defined in Exercise 2 above.
    - Virtual Network Subnets: Select Subnet-1 (10.0.0.0/23)

    Click the Next button to continue.
  7. On the Virtual Machine Options page, click the Checkmark button to begin provisioning the new virtual machine.

    As the new virtual machine is being provisioned, you will see the Status column on the Virtual Machines page of the Windows Azure Management Portal cycle through several values including Stopped, Stopped (Provisioning), and Running (Provisioning).  When provisioning for this new Virtual Machine is completed, the Status column will display a value of Running and you may continue with the next step in this guide.
  8. After the new virtual machine has finished provisioning, click on the name ( XXXlabad01 ) of the new Virtual Machine displayed on the Virtual Machines page of the Windows Azure Management Portal.
  9. On the virtual machine details page for XXXlabad01, make note of the Internal IP Address displayed on this page.  This IP address should be listed as 10.0.0.4

    If a different internal IP address is displayed, the virtual network and/or virtual machine configuration was not completed correctly.  In this case, click the DELETE button located on the bottom toolbar of the virtual machine details page for XXXlabad01, and go back to Exercise 2 and Exercise 3 to confirm that all steps were completed correctly.
  10. On the virtual machine details page for XXXlabad01, click the Attach button located on the bottom navigation toolbar and select Attach Empty Disk.  Complete the following fields on the Attach an empty disk to the virtual machine form:

    - Name: XXXlabad01-data01
    - Size: 10 GB
    - Host Cache Preference: None

    Click the Checkmark button to create and attach the a new virtual hard disk to virtual machine XXXlabad01.
  11. On the virtual machine details page for XXXlabad01, click the Connect button located on the bottom navigation toolbar and click the Open button to launch a Remote Desktop Connection to the console of this virtual machine.  Logon at the console of your virtual machine with the local Administrator credentials defined in Step 5 above.
  12. From the Remote Desktop console of XXXlabad01, create a new partition on the additional data disk attached above in Step 10 and format this partition as a new F: NTFS volume.  This volume will be used for NTDS DIT database, log and SYSVOL folder locations.

    If you need additional guidance to complete this step, feel free to leverage the following study guide for assistance: Windows Server 2012 “Early Experts” Challenge – Configure Local Storage
  13. Using the Server Manager tool, install Active Directory Domain Services and promote this server to a domain controller in a new forest with the following parameters:

    - Active Directory Forest name: contoso.com
    - Volume Location for NTDS database, log and SYSVOL folders: F:

    If you need additional guidance to complete this step, feel free to leverage the following study guide for assistance: Windows Server 2012 “Early Experts” Challenge – Install and Administer Active Directory
  14. After Active Directory has been installed, create the following user accounts that will be used when installing and configuring SharePoint Server 2013 later in this step-by-step guide:

    - CONTOSO\sp_farm – SharePoint Farm Data Access Account
    - CONTOSO\sp_serviceapps – SharePoint Farm Service Applications Account

    If you need additional guidance to complete this step, feel free to leverage the following study guide for assistance: Windows Server 2012 “Early Experts” Challenge – Install and Administer Active Directory

The configuration for this virtual machine is now complete, and you may continue with the next exercise in this step-by-step guide.

Exercise 4: Configure SQL Server 2012 in a Windows Azure VM

Provision a new Windows Azure VM to run SQL Server 2012 by performing the following steps:

  1. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  2. Select Virtual Machines located on the side navigation panel on the Windows Azure Management Portal page.
  3. Click the +NEW button located on the bottom navigation bar and select Compute | Virtual Machines | From Gallery.
  4. In the Virtual Machine Operating System Selection list, select SQL Server 2012 Evaluation Edition and click the Next button.
  5. On the Virtual Machine Configuration page, complete the fields as follows:

    - Virtual Machine Name: XXXlabdb01
    - New Password and Confirm Password fields: Choose and confirm a new local Administrator password.
    - Size: Medium (2 cores, 3.5GB Memory)

    Click the Next button to continue.
  6. On the Virtual Machine Mode page, complete the fields as follows:

    - Standalone Virtual Machine: Selected
    - DNS Name: XXXlabdb01.cloudapp.net
    - Storage Account: Select the Storage Account defined in the Getting Started steps from the Prerequisites section above.
    - Region/Affinity Group/Virtual Network: Select XXXlabnet01 – the Virtual Network defined in Exercise 2 above.
    - Virtual Network Subnets: Select Subnet-1 (10.0.0.0/23)

    Click the Next button to continue.
  7. On the Virtual Machine Options page, click the Checkmark button to begin provisioning the new virtual machine.

    As the new virtual machine is being provisioned, you will see the Status column on the Virtual Machines page of the Windows Azure Management Portal cycle through several values including Stopped, Stopped (Provisioning), and Running (Provisioning).  When provisioning for this new Virtual Machine is completed, the Status column will display a value of Running and you may continue with the next step in this guide.
  8. After the new virtual machine has finished provisioning, click on the name ( XXXlabdb01 ) of the new Virtual Machine displayed on the Virtual Machines page of the Windows Azure Management Portal.
  9. On the virtual machine details page for XXXlabdb01, make note of the Internal IP Address displayed on this page.  This IP address should be listed as 10.0.0.5

    If a different internal IP address is displayed, the virtual network and/or virtual machine configuration was not completed correctly.  In this case, click the DELETE button located on the bottom toolbar of the virtual machine details page for XXXlabdb01, and go back to Exercise 2 and Exercise 3 to confirm that all steps were completed correctly.
  10. On the virtual machine details page for XXXlabdb01, click the Attach button located on the bottom navigation toolbar and select Attach Empty Disk.  Complete the following fields on the Attach an empty disk to the virtual machine form:

    - Name: XXXlabdb01-data01
    - Size: 50 GB
    - Host Cache Preference: None

    Click the Checkmark button to create and attach the a new virtual hard disk to virtual machine XXXlabdb01.
  11. On the virtual machine details page for XXXlabdb01, click the Connect button located on the bottom navigation toolbar and click the Open button to launch a Remote Desktop Connection to the console of this virtual machine.  Logon at the console of your virtual machine with the local Administrator credentials defined in Step 5 above.
  12. From the Remote Desktop console of XXXlabdb01, create a new partition on the additional data disk attached above in Step 10 and format this partition as a new F: NTFS volume.
  13. Open SQL Server Management Studio from Start | All Programs | Microsoft SQL Server 2012 | SQL Server Management Studio and update default folder locations to the F: volume.

    1. Connect to the SQL Server 2012 default instance using your Windows Account.
    2. Now, you will update the database's default locations for DATA, LOGS and BACKUP folders. To do this, right click on your SQL Server instance and select Properties.
    3. Select Database Settings from the left side pane.
    4. Locate the Database default locations section and update the default values for each path to point to the F: volume you previously formatted.
    5. Close SQL Server Management Studio.
  14. In order to allow SharePoint to connect to the SQL Server, you will need to add an Inbound Rule for the SQL Server requests in the Windows Firewall. To do this, open Windows Firewall with Advanced Security from Start | All Programs | Administrative Tools.

    1. Select Inbound Rules node, right-click it and select New Rule to open the New Inbound Rule Wizard.

    2. In the Rule Type page, select Port and click Next.

    3. In Protocols and Ports page, leave TCP selected, select Specific local ports, and set its value to 1433. Click Next to continue.

    4. In the Action page, make sure that Allow the connection is selected and click Next.

    5. In the Profile page, leave the default values and click Next.

    6. In the Name page, set the Inbound Rule's Name to SQLServerRule and click Finish

    7. Close Windows Firewall with Advanced Security window.

  15. Using the Server Manager tool, join this server to the contoso.com domain and restart the server to complete the domain join operation.
  16. After the server restarts, connect again via Remote Desktop to the server’s console and login with the local Administrator credentials defined above in Step 5.

  17. Open SQL Server Management Studio from Start | All Programs | Microsoft SQL Server 2012 | SQL Server Management Studio and add the CONTOSO\Administrator user to SQL Server with the Sysadmin server role selected.

    1. Expand Security folder within the SQL Server instance. Right-click Logins folder and select New Login.

    2. In the General section, set the Login name to CONTOSO\Administrator, and select the Windows Authentication option.

    3. Click Server Roles on the left pane.  Select the checkbox for the Sysadmin server role.

    4. Click the OK button and close SQL Server Management Studio.

The configuration for this virtual machine is now complete, and you may continue with the next exercise in this step-by-step guide.

Exercise 5: Configure SharePoint Server 2013 in a Windows Azure VM

Provision a new Windows Azure VM to run SharePoint Server 2013 by performing the following steps:

  1. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  2. Select Virtual Machines located on the side navigation panel on the Windows Azure Management Portal page.
  3. Click the +NEW button located on the bottom navigation bar and select Compute | Virtual Machines | From Gallery.
  4. In the Virtual Machine Operating System Selection list, select Windows Server 2012, December 2012 and click the Next button.
  5. On the Virtual Machine Configuration page, complete the fields as follows:

    - Virtual Machine Name: XXXlabapp01
    - New Password and Confirm Password fields: Choose and confirm a new local Administrator password.
    - Size: Large (4 cores, 7GB Memory)

    Click the Next button to continue.
  6. On the Virtual Machine Mode page, complete the fields as follows:

    - Standalone Virtual Machine: Selected
    - DNS Name: XXXlabapp01.cloudapp.net
    - Storage Account: Select the Storage Account defined in the Getting Started steps from the Prerequisites section above.
    - Region/Affinity Group/Virtual Network: Select XXXlabnet01 – the Virtual Network defined in Exercise 2 above.
    - Virtual Network Subnets: Select Subnet-1 (10.0.0.0/23)

    Click the Next button to continue.
  7. On the Virtual Machine Options page, click the Checkmark button to begin provisioning the new virtual machine.

    As the new virtual machine is being provisioned, you will see the Status column on the Virtual Machines page of the Windows Azure Management Portal cycle through several values including Stopped, Stopped (Provisioning), and Running (Provisioning).  When provisioning for this new Virtual Machine is completed, the Status column will display a value of Running and you may continue with the next step in this guide.
  8. After the new virtual machine has finished provisioning, click on the name ( XXXlabapp01 ) of the new Virtual Machine displayed on the Virtual Machines page of the Windows Azure Management Portal.
  9. On the virtual machine details page for XXXlabapp01, make note of the Internal IP Address displayed on this page.  This IP address should be listed as 10.0.0.6

    If a different internal IP address is displayed, the virtual network and/or virtual machine configuration was not completed correctly.  In this case, click the DELETE button located on the bottom toolbar of the virtual machine details page for XXXlabapp01, and go back to Exercise 2,  Exercise 3 and Exercise 4 to confirm that all steps were completed correctly.
  10. On the virtual machine details page for XXXlabapp01, click the Attach button located on the bottom navigation toolbar and select Attach Empty Disk.  Complete the following fields on the Attach an empty disk to the virtual machine form:

    - Name: XXXlabapp01-data01
    - Size: 50 GB
    - Host Cache Preference: None

    Click the Checkmark button to create and attach the a new virtual hard disk to virtual machine XXXlabapp01.
  11. On the virtual machine details page for XXXlabapp01, click the Connect button located on the bottom navigation toolbar and click the Open button to launch a Remote Desktop Connection to the console of this virtual machine.  Logon at the console of your virtual machine with the local Administrator credentials defined in Step 5 above.
  12. From the Remote Desktop console of XXXlabapp01, create a new partition on the additional data disk attached above in Step 10 and format this partition as a new F: NTFS volume.  
  13. In the Server Manager tool, click on Local Server in the left navigation pane and click on the Workgroup option.  Join this server to the contoso.com domain and restart the server to complete the domain join operation.
  14. After the server restarts, re-establish a Remote Desktop connection to the server and logon with the CONTOSO\Administrator domain user credentials defined earlier in Exercise 3.
  15. In the Server Manager tool, click on Local Server in the left navigation pane and select IE Enhanced Security Configuration. Turn off enhanced security for Administrators and click the OK button.

    Note: Modifying Internet Explorer Enhanced Security configurations is not good practice and is only for the purpose of this particular step-by-step guide. The correct approach should be to download files locally and then copy them to a shared folder or directly to the VM.

  16. Press the Windows key to switch to the Start Screen and launch Internet Explorer.  Download the following files to the F:\INSTALL folder:

    - SharePoint Server 2013 Evaluation Edition

    Make a note of the SharePoint Product Key listed on this page, as you’ll need it for the installation of SharePoint Server 2013.

    - ASP.NET 4.5 hotfix for Windows Server 2012 ( KB2765317 )

  17. Navigate to the F:\INSTALL folder and double-click on the downloaded .IMG file to mount it.  Copy all files and folders from the mounted .IMG file to F:\INSTALL.
  18. Install the SharePoint Server 2013 software prerequisites by running F:\INSTALL\prerequisiteinstaller.exe.  Note that this process may require multiple server restarts to complete.  After all required software is successfully installed, continue with the next step in this step-by-step guide.
  19. Install the ASP.NET 4.5 hotfix downloaded to the F:\INSTALL folder in Step 14 above.
  20. Run F:\INSTALL\setup.exe to launch the SharePoint Server 2013 installation process.
  21. When prompted, on the Server Type tab of the setup program, select the Complete installation option.
  22. On the File Location tab of the setup program, change the data path to use the F: volume formatted in Step 12 above.
  23. At the end of the installation process, ensure the checkbox is selected to Run the SharePoint Products Configuration Wizard Now and click the Close button.
  24. In the SharePoint Products Configuration Wizard, when prompted on the Connect to server farm dialog, select the option to Create a new server farm.
  25. On the Specify Configuration Database Settings, specify the following values for each field:

    - Database Server: XXXlabdb01
    - Username: CONTOSO\sp_farm
    - Password: Type the password specified when the sp_farm domain user account was created earlier in Exercise 3, Step 14.
  26. Click the Next > button and accept all other default values in the SharePoint Products Configuration Wizard.  Click the Finish button when prompted to complete the wizard.
  27. The SharePoint 2013 Central Administration web page should launch automatically.  When prompted, click the Start the Wizard button to begin the Initial Farm Configuration Wizard.
  28. When prompted for Service Account, type the CONTOSO\sp_serviceapps domain username and password specified when this account was created earlier in Exercise 3, Step 14.
  29. Accept all other default values and click the Next > button to continue.
  30. On the Create a Site Collection page, create a new top-level Intranet site collection using the following field values:

    - Title and Description: Enter your preferred Title and Description for the new site collection
    - URL: Select the root URL path – http://XXXlabapp01/
    - Select experience version:
    2013
    - Select a template: Publishing | Publishing Portal

    Click the OK button to provision a new top-level Intranet site collection. 

    After the new top-level Intranet site collection is provisioned, test navigating to the URL for this site collection from within the Remote Desktop session to the server.
  31. On the SharePoint 2013 Central Administration site, configure a Public URL alternate access mapping for accessing the new top-level Intranet site collection from the Internet.
    1. On the Central Administration site home page, click the Configure alternate access mappings link.
    2. On the Alternate Access Mappings page, click the Edit Public URLs link.
    3. On the Edit Public Zone URLs page, select and specify the following values:

      - Alternate Access Mapping Collection: SharePoint - 80
      - Internet: http://XXXlabapp01.cloudapp.net

      Click the Save button to complete the Alternate Access Mapping configuration.
  32. Close the Remote Desktop session to the server.
  33. Sign in at the Windows Azure Management Portal with the logon credentials used when you signed up for your Free 90-Day Windows Azure Trial.
  34. Select Virtual Machines located on the side navigation panel on the Windows Azure Management Portal page.
  35. On the Virtual Machines page, click on the name of the SharePoint virtual machine – XXXlabapp01.
  36. On the XXXlabapp01 virtual machine details page, click on Endpoints in the top navigation area of the page.
  37. Click the +Add Endpoint button in the bottom navigation bar of the page to define a new virtual machine endpoint that will permit HTTP web traffic inbound to the SharePoint virtual machine. 
  38. On the Add an endpoint to a virtual machine form, select the Add Endpoint option and click the Next button to continue.
  39. On the Specify the details of the endpoint form, specify the following field values:

    - Name: Web HTTP
    - Protocol: TCP
    - Public Port: 80
    - Private Port: 80

    Click the Checkmark button to create a new endpoint definition that will permit inbound web traffic to the SharePoint virtual machine.
  40. After the endpoint configuration has been successfully applied, test browsing to the following public URL to confirm that you are able to access the Intranet site collection that is configured on SharePoint:

    - URL: http://XXXlabapp01.cloudapp.net

The configuration for this virtual machine is now complete, and you may continue with the next exercise in this step-by-step guide.

Exercise 6: Export / Import Lab Environment via PowerShell

Our functional SharePoint lab environment is now complete, but if you’re like me, you won’t be using this lab environment 24x7 around-the-clock.  As long as the virtual machines are provisioned, they will continue to accumulate compute hours against your Free 90-Day Windows Azure Trial account regardless of virtual machine state – even in a shutdown state!

To preserve as many of your free compute hours for productive lab work, we can leverage the Windows Azure PowerShell module to de-provision our lab virtual machines when not in use and re-provision our lab virtual machines when we need them again.  Once you’ve configured the PowerShell scripts below, you’ll be able to spin up your SharePoint lab environment when needed in as little as 5-10 minutes!

Note: Prior to beginning this exercise, please ensure that you’ve downloaded, installed and configured the Windows Azure PowerShell module as outlined in the Getting Started article listed in the Prerequisite section of this step-by-step guide.

  1. De-provisioning your lab. Use the PowerShell snippet below to shutdown, export and de-provision your SharePoint lab environment when you’re not using it.  Prior to running this script, be sure to edit the first line to reflect the names of each of your VMs and confirm that the $ExportPath location exists.

    $myVMs = @("XXXlabapp01","XXXlabdb01","XXXlabad01")
    Foreach ( $myVM in $myVMs ) {
    Stop-AzureVM -ServiceName $myVM -Name $myVM
    $ExportPath = "C:\ExportVMs\ExportAzureVM-$myVM.xml"
    Export-AzureVM -ServiceName $myVM -name $myVM -Path $ExportPath
    Remove-AzureVM -ServiceName $myVM -name $myVM
    }

  2. Re-provisioning your lab. Use the PowerShell snippet below to import and re-provision your SharePoint lab environment when you’re ready to use it again.  Prior to running this script, be sure to edit the first two lines to reflect the names of your Virtual Network and VMs.

    $myVNet = "XXXlabnet01"
    $myVMs = @("XXXlabad01","XXXlabdb01","XXXlabapp01")
    Foreach ( $myVM in $myVMs ) {
    $ExportPath = "C:\ExportVMs\ExportAzureVM-$myVM.xml"    
    Import-AzureVM -Path $ExportPath | New-AzureVM -ServiceName $myVM -VNetName $myVNet
    Start-AzureVM -ServiceName $myVM -name $myVM
    }

To ensure safe de-provisioning and re-provisioning of your SharePoint lab environment, note that it is important to preserve the specific order of the VM names listed in both code snippets above to ensure that the dependency order across VMs is properly handled.

What’s Next? Keep Learning!

Now that your SharePoint Server 2013 lab environment is running in the cloud, be sure to explore the resources below to continue your learning:

Build Your Lab! Build Your Lab! Download Windows Server 2012
Build Your Lab in the Cloud! Don’t Have a Lab? Build Your Lab in the Cloud with Windows Azure Virtual Machines
Join our "Early Experts" study group! Want to Get Certified? Join our Windows Server 2012 "Early Experts" Study Group

More Stories By Keith Mayer

Keith Mayer is a Technical Evangelist at Microsoft focused on Windows Infrastructure, Data Center Virtualization, Systems Management and Private Cloud. Keith has over 17 years of experience as a technical leader of complex IT projects, in diverse roles, such as Network Engineer, IT Manager, Technical Instructor and Consultant. He has consulted and trained thousands of IT professionals worldwide on the design and implementation of enterprise technology solutions.

Keith is currently certified on several Microsoft technologies, including System Center, Hyper-V, Windows, Windows Server, SharePoint and Exchange. He also holds other industry certifications from IBM, Cisco, Citrix, HP, CheckPoint, CompTIA and Interwoven.

Keith is the author of the IT Pros ROCK! Blog on Microsoft TechNet, voted as one of the Top 50 "Must Read" IT Blogs.

Keith also manages the Windows Server 2012 "Early Experts" Challenge - a FREE online study group for IT Pros interested in studying and preparing for certification on Windows Server 2012. Join us and become the next "Early Expert"!

@DevOpsSummit Stories
Infoblox delivers Actionable Network Intelligence to enterprise, government, and service provider customers around the world. They are the industry leader in DNS, DHCP, and IP address management, the category known as DDI. We empower thousands of organizations to control and secure their networks from the core-enabling them to increase efficiency and visibility, improve customer service, and meet compliance requirements.
In his session at 21st Cloud Expo, Michael Burley, a Senior Business Development Executive in IT Services at NetApp, will describe how NetApp designed a three-year program of work to migrate 25PB of a major telco's enterprise data to a new STaaS platform, and then secured a long-term contract to manage and operate the platform. This significant program blended the best of NetApp’s solutions and services capabilities to enable this telco’s successful adoption of private cloud storage and launching of virtual storage services to its enterprise market.
Join IBM November 1 at 21st Cloud Expo at the Santa Clara Convention Center in Santa Clara, CA, and learn how IBM Watson can bring cognitive services and AI to intelligent, unmanned systems. Cognitive analysis impacts today’s systems with unparalleled ability that were previously available only to manned, back-end operations. Thanks to cloud processing, IBM Watson can bring cognitive services and AI to intelligent, unmanned systems. Imagine a robot vacuum that becomes your personal assistant that knows everything and can respond to your emotions and verbal commands!
The next XaaS is CICDaaS. Why? Because CICD saves developers a huge amount of time. CD is an especially great option for projects that require multiple and frequent contributions to be integrated. But… securing CICD best practices is an emerging, essential, yet little understood practice for DevOps teams and their Cloud Service Providers. The only way to get CICD to work in a highly secure environment takes collaboration, patience and persistence. Building CICD in the cloud requires rigorous architectural and coordination work to minimize the volatility of the cloud environment and leverage the security features of the cloud to the benefit of the CICD pipeline.
In his Opening Keynote at 21st Cloud Expo, John Considine, General Manager of IBM Cloud Infrastructure, will lead you through the exciting evolution of the cloud. He'll look at this major disruption from the perspective of technology, business models, and what this means for enterprises of all sizes. John Considine is General Manager of Cloud Infrastructure Services at IBM. In that role he is responsible for leading IBM’s public cloud infrastructure including strategy, development, and offering management. To date, IBM has launched more than 50 cloud data centers that span the globe. He has been building advanced technology, delivering “as a service” solutions, and managing infrastructure services for the past 20 years.
Cloud Expo, Inc. has announced today that Andi Mann and Aruna Ravichandran have been named Co-Chairs of @DevOpsSummit at Cloud Expo Silicon Valley which will take place Oct. 31-Nov. 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. "DevOps is at the intersection of technology and business-optimizing tools, organizations and processes to bring measurable improvements in productivity and profitability," said Aruna Ravichandran, vice president, DevOps product and solutions marketing, CA Technologies. "It's this results-driven combination of technology and business that makes me so passionate about DevOps and its future in the industry. I am truly honored to take on this co-chair role, and look forward to working with the DevOps Summit team at Cloud Expo and attendees to advance DevOps."
Coca-Cola’s Google powered digital signage system lays the groundwork for a more valuable connection between Coke and its customers. Digital signs pair software with high-resolution displays so that a message can be changed instantly based on what the operator wants to communicate or sell. In their Day 3 Keynote at 21st Cloud Expo, Greg Chambers, Global Group Director, Digital Innovation, Coca-Cola, and Vidya Nagarajan, a Senior Product Manager at Google, will discuss how from store operations and optimization to employee training and insights, all ultimately create the best customer experience both online and in-store.
We all know that end users experience the Internet primarily with mobile devices. From an app development perspective, we know that successfully responding to the needs of mobile customers depends on rapid DevOps – failing fast, in short, until the right solution evolves in your customers' relationship to your business. Whether you’re decomposing an SOA monolith, or developing a new application cloud natively, it’s not a question of using microservices – not doing so will be a path to eventual business failure.
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend 21st Cloud Expo October 31 - November 2, 2017, at the Santa Clara Convention Center, CA, and June 12-14, 2018, at the Javits Center in New York City, NY, and learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.
SYS-CON Events announced today that mruby Forum will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. mruby is the lightweight implementation of the Ruby language. We introduce mruby and the mruby IoT framework that enhances development productivity. For more information, visit http://forum.mruby.org/.
Digital transformation is changing the face of business. The IDC predicts that enterprises will commit to a massive new scale of digital transformation, to stake out leadership positions in the "digital transformation economy." Accordingly, attendees at the upcoming Cloud Expo | @ThingsExpo at the Santa Clara Convention Center in Santa Clara, CA, Oct 31-Nov 2, will find fresh new content in a new track called Enterprise Cloud & Digital Transformation.
SYS-CON Events announced today that NetApp has been named “Bronze Sponsor” of SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. NetApp is the data authority for hybrid cloud. NetApp provides a full range of hybrid cloud data services that simplify management of applications and data across cloud and on-premises environments to accelerate digital transformation. Together with their partners, NetApp empowers global organizations to unleash the full potential of their data to expand customer touchpoints, foster greater innovation and optimize their operations.
SYS-CON Events announced today that Avere Systems, a leading provider of enterprise storage for the hybrid cloud, will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Avere delivers a more modern architectural approach to storage that doesn't require the overprovisioning of storage capacity to achieve performance, overspending on expensive storage media for inactive data or the overbuilding of data centers to house increasing amounts of storage infrastructure.
Most technology leaders, contemporary and from the hardware era, are reshaping their businesses to do software. They hope to capture value from emerging technologies such as IoT, SDN, and AI. Ultimately, irrespective of the vertical, it is about deriving value from independent software applications participating in an ecosystem as one comprehensive solution. In his session at @ThingsExpo, Kausik Sridhar, founder and CTO of Pulzze Systems, will discuss how given the magnitude of today's application ecosystem, tweaking existing software to stitch various components together leads to sub-optimal solutions. This definitely deserves a re-think, and paves the way for a new breed of lightweight application servers that are micro-services and DevOps ready!
The dynamic nature of the cloud means that change is a constant when it comes to modern cloud-based infrastructure. Delivering modern applications to end users, therefore, is a constantly shifting challenge. Delivery automation helps IT Ops teams ensure that apps are providing an optimal end user experience over hybrid-cloud and multi-cloud environments, no matter what the current state of the infrastructure is. To employ a delivery automation strategy that reflects your business rules, making real-time decisions based on a combination of real user monitoring, synthetic testing, APM, NGINX / local load balancers, and other data sources, is critical.
In a recent survey, Sumo Logic surveyed 1,500 customers who employ cloud services such as Amazon Web Services (AWS), Microsoft Azure, and Google Cloud Platform (GCP). According to the survey, a quarter of the respondents have already deployed Docker containers and nearly as many (23 percent) are employing the AWS Lambda serverless computing framework. It’s clear: serverless is here to stay. The adoption does come with some needed changes, within both application development and operations. That means serverless is also changing the way we leverage public clouds. Truth-be-told, many enterprise IT shops were so happy to get out of the management of physical servers within a data center that many limitations of the existing public IaaS clouds were forgiven. However, now that we’ve lived a few years with public IaaS clouds, developers and CloudOps pros are giving a huge thumbs down to the ...
Enterprises are adopting Kubernetes to accelerate the development and the delivery of cloud-native applications. However, sharing a Kubernetes cluster between members of the same team can be challenging. And, sharing clusters across multiple teams is even harder. Kubernetes offers several constructs to help implement segmentation and isolation. However, these primitives can be complex to understand and apply. As a result, it’s becoming common for enterprises to end up with several clusters. This leads to a waste of cloud resources and increased operational overhead.
SYS-CON Events announced today that Taica will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. TAZMO technology and development capabilities in the semiconductor and LCD-related manufacturing fields are among the best worldwide. For more information, visit https://www.tazmo.co.jp/en/.
SYS-CON Events announced today that TidalScale will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. TidalScale is the leading provider of Software-Defined Servers that bring flexibility to modern data centers by right-sizing servers on the fly to fit any data set or workload. TidalScale’s award-winning inverse hypervisor technology combines multiple commodity servers (including their associated CPUs, memory storage and network) into one or more large servers capable of handling the biggest Big Data problems and most unpredictable workloads.
SYS-CON Events announced today that Avere Systems, a leading provider of hybrid cloud enablement solutions, will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Avere Systems was created by file systems experts determined to reinvent storage by changing the way enterprises thought about and bought storage resources. With decades of experience behind the company’s founders, Avere got its start in 2008 with a mission to use fast, flash-based storage in the most efficient, effective manner possible. What the team had discovered was a technology that optimized storage resources and reduced dependencies on sprawling storage installations. Launched as the Avere OS, this advanced file system not only boosted performance within standard, on-premises, network-attached storage systems but ...
Microsoft Azure Container Services can be used for container deployment in a variety of ways including support for Orchestrators like Kubernetes, Docker Swarm and Mesos. However, the abstraction for app development that support application self-healing, scaling and so on may not be at the right level. Helm and Draft makes this a lot easier. In this primarily demo-driven session at @DevOpsSummit at 21st Cloud Expo, Raghavan "Rags" Srinivas, a Cloud Solutions Architect/Evangelist at Microsoft, will cover Docker Swarm and Kubernetes deployments on Azure with some simple examples. He will look at Helm and Draft and how they can simplify app development significantly, like app scaling, rollback, etc. Helm is a tool that streamlines installing and managing Kubernetes applications, like the apt/yum/homebrew for Kubernetes. Draft works with pre-provided charts to deploy the apps via Helm.
Containers are rapidly finding their way into enterprise data centers, but change is difficult. How do enterprises transform their architecture with technologies like containers without losing the reliable components of their current solutions? In his session at @DevOpsSummit at 21st Cloud Expo, Tony Campbell, Director, Educational Services at CoreOS, will explore the challenges organizations are facing today as they move to containers and go over how Kubernetes applications can deploy with legacy components, and also go over automated capabilities provided by operators to auto-update Kubernetes with zero downtime for current and secure deployments.
Today most companies are adopting or evaluating container technology - Docker in particular - to speed up application deployment, drive down cost, ease management and make application delivery more flexible overall. As with most new architectures, this dream takes significant work to become a reality. Even when you do get your application componentized enough and packaged properly, there are still challenges for DevOps teams to making the shift to continuous delivery and achieving that reduction in cost and increase in speed. Sometimes in order to reduce complexity teams compromise features or change requirements
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http://www.ryobi-sol.co.jp/en/.
As you move to the cloud, your network should be efficient, secure, and easy to manage. An enterprise adopting a hybrid or public cloud needs systems and tools that provide: Agility: ability to deliver applications and services faster, even in complex hybrid environments Easier manageability: enable reliable connectivity with complete oversight as the data center network evolves Greater efficiency: eliminate wasted effort while reducing errors and optimize asset utilization Security: implement always-vigilant DNS security